KTC Factory


The factory of Kerman Tablo Corp. with an area of 16000 square meters located in the historic all city of Kerman in the south-east of Iran. The factory has a staff of 250 people including 30% experts and 70% technicians in its two main divisions of Electronics and Panel manufacturing.
The factory, equipped with modern CNC metal work machinery, continuous electrostatic powder paint system, and high voltage laboratory test equipment, is capable of manufacturing a wide range of different types of panels and switchgears in accordance with IEC standards. Many of these products have type test certificate from accredited international laboratories. The annual production capacity of the factory is over 5000 cubicles in one shift work day.

Main products:
• Low voltage panels in fixed and withdraw able types with nominal current up to 8000A, short circuit current capacity 80kA and degree of protection up to IP54;
• MCC panels in fixed and withdraw able models with nominal current of up to 6000A, short circuit current capacity up to 50kA, and degree of protection up to IP42;
• MV switchgears in fixed and withdraw able models up to 36KV with short circuit capacity of 40kA and degree of protection up to IP42;
• Control panels;
• Remote control unit panels (RTU);
• Automatic voltage regulator panels (AVR) and
• Protection panels.

Departments:
1. Supporting Department.
This department consists of the administrative, financial, logistic, human resource, and purchase sections.
2. Sales and marketing Department.
This department is responsible for sales and marketing of the factory products.
3. R&D Department.
This department with highly trained and experienced staff is responsible for development of new products according to market researches and customer requirements. It is also responsible for obtaining type test certificates for the developed products from accredited international test laboratories.
4. Design and Engineering Department.
The department with its highly trained and competent staff and advanced Engineering software is responsible for electrical design of the MV, LV and control panels in accordance with the client’s requirements and relevant standards. The Engineering Dept also prepares the required documentation for manufacturing, testing, quality controlling, and also documentation for clients.
5. Planning Department.
This department is responsible for planning different stages of the orders or contracts including engineering, manufacturing, packaging and delivery.
6. Metal Work and Mechanical Assembly Department.
Based on the mechanical parts and structures designed, by the Engineering Department, a software together with the required information deliver to the Metal Work Workshop. In this workshop, the parts are punched, bent and pressed, welded, surface treated and painted. The parts are then assembled in three assembly lines for MV, MCC, and control panels accordingly.
7. Electrical Assembly Department.
In this department the electrical parts and busbars are assembled into cubicles, wired and cabled in three assembly lines accordingly.
8. Quality Control Department.
Quality Control, as an independent department, with competent staff who has the required authority, is responsible for the inspection of raw material, in process and final product. The data obtained during inspection activities are analyzed and used as one of the inputs for Continuous improvement of product specifications.
9. Test Section
The Test Section, which has high voltage test equipment and instruments, is responsible to perform routine tests and some items of type tests in accordance with relevant IEC standards. The test laboratory is equipped with power frequency test equipment up to 85 kA, AC and impulse test equipment up to 175 kV, DC.
10. Packaging and Warehouse Department.
This department is responsible for storage and protection of raw material and control of the inventory. The products are packaged in accordance with the standard instructions or customer requirements, prior to delivery.
11. Quality Assurance Department.
This department, with its experienced staff who has the required authority, is responsible for the design, implementation, maintaining and improvement of the Quality Management System based on ISO 9000 standards. This department is also responsible for managing productivity and continuous improvement.
12. Training Department.
Training is an indispensable part of any advanced organization. The Training Department is responsible for planning and effective execution of training.